How do I change the Wi-Fi network name (SSID)?

For the MAVEL Box:

1. Log in to the Modem:

   • Open your browser and enter the following IP address: 192.168.10.1.

2. Access the Wireless Settings:

   • After logging in, navigate to the “Wireless” section.

3. Modify the Wi-Fi Name (SSID):

   • In the “Wireless” settings, find the SSID field (Wi-Fi Name) and change it to the desired name.

4. Apply the Changes:

   • Click “APPLY” to save the changes to the network name.

• For the S20 and T30 Modems:

  1. Log in to the Modem:

     • Open your browser and type the IP address 192.168.1.1 in the address bar.

  2. Login Credentials:

     • On the login page, enter “admin” as both the username and the password.

  3. Navigate to Device Settings:

     • Once logged in, go to “Device Settings.”

  4. Access the Wi-Fi Settings:

     • In the “Wi-Fi Settings” section, modify the Wi-Fi network name (SSID).

  5. Apply the Changes:

     • After making the changes, click “Apply” to confirm the modification.

• Log in to the Modem:

  • Open your browser and enter the IP address 192.168.1.1.

• Login Credentials:

  • Use “admin” as the username and password to log into the modem.

• Access Wi-Fi Settings:

  • Once logged in, go to the “Wi-Fi Settings” page.

• Modify the Wi-Fi Name (SSID):

  • Change the Wi-Fi Name (SSID) as needed.

• Apply the Changes:

  • Click “Apply” to save the modifications.

• For the MAVEL Box:

  1. Go to Wireless Settings:In the “Wireless” section, click on the “Security” tab.

  2. Change the Wi-Fi Password: In the “WPA-PSK Key” field, enter the new password for the Wi-Fi network.

  3. Apply the Changes: After entering the new password, click “APPLY” to save the new password.

• For the S20 and T30 Modems:

  1. Go to Device Settings: In the configuration page, navigate to “Device Settings.”

  2. Access Wi-Fi Settings: Click on “Wi-Fi Settings” to access the password change option.

  3. Modify the Wi-Fi Password: Change the password in the appropriate field.

  4. Apply the Changes:

     • After modifying the password, click “Apply” to confirm and save the changes.

• For the Top Link HW303 Modem:

  1. Go to Wi-Fi Settings: Access the “Wi-Fi Settings” page after logging into the modem.

  2. Change the Wi-Fi Password: Modify the Wi-Fi password in the appropriate field.

  3. Apply the Changes: After entering the new password, click “Apply” to save the changes.

• • For MAVEL Box:

    • Enter the IP address 192.168.10.1 in your browser’s address bar.

    • Once you access the login page, log in using the credentials (if required).

  • For S20 and T30 Modems:

    • Open your browser and type 192.168.1.1 in the address bar.

    • Enter “admin” as both the username and password to access the modem’s configuration page.

  • For Top Link HW303 Modem:

    • Enter 192.168.1.1 in your browser.

    • Log in with the username “admin” and password “admin” to access the settings page.

• • Ensure You Click “Apply”:

    • After making changes to the Wi-Fi name or password, ensure you click “APPLY” to save the new settings.

  • Restart the Modem:

    • Sometimes changes may not take effect immediately. Try restarting your modem to ensure the new settings are applied.

Yes, you can change both the Wi-Fi network name (SSID) and the Wi-Fi password at the same time. However, ensure you click “Apply” after each change to save the modifications. You can modify both the SSID and the WPA-PSK key (password) in the “Wireless” or “Wi-Fi Settings” sections and then apply the changes.

Resetting the Modem:

• If you have forgotten the login credentials for your modem, you may need to reset the modem to its default factory settings. This can usually be done by pressing and holding a reset button located on the modem for about 10 seconds (check your modem’s manual for specific instructions).

• After resetting, you can log in using the default username and password, which is often “admin” for both fields.

• For most modems, the default login credentials are:

  • Username: admin

  • Password: admin

• If these don’t work, check your modem’s documentation or the label on the modem for the correct login credentials.